Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Using PWM to control servo

Created by: hrnn at: 8/27/2013 1:35 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/27/2013 1:35 PM	Rate (0)
hrnn Posts: 7 Rating: (0)	Hello, i have 1215c. i made pulse with PWM cammand but i dont know how change motors velocity and width and how can i look finish time pwm command.As long as the pwm command is enable,the pulse continues to produce. thank you...
hrnn Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

8/28/2013 12:06 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/28/2023 Posts: 4176 Rating: (1323)	Hi, Once enabled, the PWM is a continous function, the QW (e.g QW100) is always passed to digital output. Are you shure that you need a PWM and not a PTO?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

10/23/2013 12:50 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 1/20/2023 Posts: 2685 Rating: (135)	New question splitted to Is the PWM function available for the S7-1500? Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on