Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Using same Block Icon twice

Created by: Ankit at: 5/13/2010 8:35 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/13/2010 8:35 AM	Rate (0)
Ankit Experienced Member Joined: 2/18/2010 Last visit: 12/11/2024 Posts: 24 Rating: (1)	Hi! This may sound like a *** question, but please help me with this. I am kind of new to PCS7. I am using PCS7 v7.1 Single Station. I want to show the block icon for aparticular PIDon two pictures. When I copy paste the block icon, it works. But all such copied block icons are lost when I re-compile the OS. Is there another way to do this? Maybe, one can be the primary block icon (with which the loop-in works) and the other can be only used for monioring & control. Thanks a lot.

Suggestion To thank Quote Answer

5/13/2010 8:59 AM	Rate (0)
Andrej Zeme Posts: 4 Rating: (0)	Hi, open properties of copied block icons -> General -> Delete" @ "under atribute type.
Andrej Zeme Posts: 4 Rating: (0)	Last edited by: Andrej Zeme at: 5/13/2010 8:59 AM
Suggestion To thank Quote Answer

5/13/2010 2:10 PM	Rate (0)
Ankit Experienced Member Joined: 2/18/2010 Last visit: 12/11/2024 Posts: 24 Rating: (1)	Thanks a lot. It worked perfectly. :) Though I didn't find the 'Type' attribute under General (there was no General), but under 'System'. But thanks anyways!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on