Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

USS PROTOCOL WITH PLC S7-300

Created by: kettaneh at: 5/27/2009 12:14 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/27/2009 12:14 PM	Rate (0)
kettaneh Posts: 7 Rating: (0)	Dear colleagues, I am using a CPU S7-300, with USS PROTOCOL by men of a CP 340 COMMUNICATION PROCESSOR WITH RS422/485 . i have never tried it but i was advised that i need a special software include the instructions and blocks, could you please advice what do i need to prepare for this application and appreciated if you could send me an example of a software which is done before. kind regards.
kettaneh Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

5/27/2009 12:20 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 12/27/2022 Posts: 2957 Rating: (241)	Hi, Look at this forum post /tf/WW/en/Posts/3759 It might be helpful for you. See attachment in this post. Its about USS. It seems that you need to write USS communication blocks by yourself.
	Last edited by: Darius at: 5/27/2009 12:24 PM Last edited by: Darius at: 5/27/2009 12:21 PM Best regards, Darius
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on