Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

V10.5 to V11 migration errors

Created by: Edma at: 9/1/2011 1:30 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/1/2011 1:30 PM	Rate (0)
Edma Posts: 11 Rating: (0)	Dear All, I have a problem that after project migration from v10.5 to v11 ktp600 panel program text is not convertet and everythere i see the text "text". If I understand corectly after conversion it takes german language as default. Then I try to change runtime language tia portal crashes. Thank you in advance for the support.
Edma Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

9/5/2011 1:20 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 12/1/2023 Posts: 4279 Rating: (1378)	Hi, This is unusual. Do you have alread open a Support Requestabout it? Maybe should be good that you send you project to be analised for the Customer Support Team.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

HMI-Migration

Follow us on