V18 MTP1200 how to change the screen using PLC TAG and how to write the fill level in the BAR?

Hi,

It is tiring to have to tell you again and again that your question must be formulated in an understandable way in order to get a useful answer. At least you managed to communicate that V18 is in use on the fourth try.

• There is an example "Triggering a screen change with a tag" in the system manual.
• The "fill level" of the bar is controlled by the ProcessValue property.
• What do you mean by "correct angle using the timer"?

Kind regards
Stefan

[OFF TOPIC]

AutoGen_9303346

They are using TIA PORTAL V18 and CPU is using 1517F HMI MTP1200
They're trying to change the screen using PLC TAG And please tell me how to write the fill level in the BAR or correct angle using the timer

Would that be "they' as in a translation problem or "they" because the writer of the problem statement is not the one who needs help?

This question is about the MTP1200 HMI. The best conference is the "WinCC Unified Systems". The Moderator is going to move it there. Please place future questions about the MTP1200 HMI in that conference.

Please construct the title so that it is a short indication of what the topic is about. Do not repeat the body of the question. Best to also keep the topic about 1 question. In this topic is 2 (maybe 3).

Consider asking the expert where to get some training materials. Our volunteers cannot do the whole project for you.