Navigation

V20 PID-setpoint

Created by: m.saoji at: 4/30/2018 3:23 PM (1 Replies)

4/30/2018 3:23 PM	Rate (0)
m.saoji Posts: 1 Rating: (0)	Hello, Is it possible to communicate the PID set-point from S7-1200 to V20 via MODBUS broadcast? I have 30 slave V20's on one s7-1200 Master.
m.saoji Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/2/2018 10:47 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/20/2024 Posts: 5974 Rating: (820)	Hello, please have a look on the following application example. https://support.industry.siemens.com/cs/us/en/view/63696870 You can find information about acyclic data access there which should enable you to send variable parameters.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer