Navigation

V90 - Cyclic absolute encoder

Created by: barteeky at: 4/20/2023 7:35 PM (1 Replies)

4/20/2023 7:35 PM	Rate (0)
barteeky Member Joined: 10/26/2020 Last visit: 4/20/2023 Posts: 5 Rating: (0)	Hi Guys, I have two question about V90 systems... How its work if I choose in technology object : Encoder mounting type : On load side Encoder : External device (For example singleturn absolute profinet from sick) Encoder type : Cyclic absolute The position will be resetted to zero automatically every time when encoder make a full rotation? Or I need to make additionals function in my software? Why I am asking.. I need to find a solution to control "carousel - 360deg with 4 work positions , move 90deg". I have lifts on each of the four sides, so I need to additionally identify where a particular one is located So my first idea was use a V90 servo drive with single turn absolute encoder on load side, what u think about this option? Maybe someone has experience with similar application?

Suggestion To thank Quote Answer

4/21/2023 10:56 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/20/2024 Posts: 5974 Rating: (820)	Hello, The position will be resetted to zero automatically every time when encoder make a full rotation? // No. I need to make additionals function in my software? // Yes, configure a Modulo axis. Example: https://support.industry.siemens.com/cs/ww/en/view/109747750
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer