Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

V90 Online Access Point

Created by: @KB@ at: 6/15/2017 5:17 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

6/15/2017 5:17 PM	Rate (0)
@KB@ Silver Member Joined: 7/30/2012 Last visit: 11/28/2024 Posts: 335 Rating: (12)	Hello... I'm Using V90 PN Version With CPU 1516 I Just Wanted To Use EPOS To Control V90 Drive Because My Application Required This....In That I Don't Have Option To Access V90 Drive Through PN Interfaces For Parametarization Now I'm Using USB Cable For V90 And LAN Cable For PLC During Commissiong Its Ok ...Later I Need To Access All The Devices From Remote Location...At That Time It Will Be Problem For Me Actually I Have Setup To Access All Other PN Devices From Remote Location...Now Only Problem With V90

Suggestion To thank Quote Answer

6/16/2017 3:30 AM	Rate (0)
siemensdi Posts: 6 Rating: (0)	please give some error id or code.
siemensdi Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

6/16/2017 4:22 AM	Rate (0)
@KB@ Silver Member Joined: 7/30/2012 Last visit: 11/28/2024 Posts: 335 Rating: (12)	Hello I Didn't Receive Any Error... To Be Frank I Just Wants To Know How To Go Online Using PN Interface For Configuration Of V90 While I'm Using EPOS ?

Suggestion To thank Quote Answer

6/16/2017 5:09 AM	Rate (0)
Jeff Casagrande Posts: 1529 Rating: (203)	For configuration of the V90 you need V Assist (separate commissioning software). It is connected with USB.
Jeff Casagrande Posts: 1529 Rating: (203)
Suggestion To thank Quote Answer

6/16/2017 3:15 PM	Rate (0)
@KB@ Silver Member Joined: 7/30/2012 Last visit: 11/28/2024 Posts: 335 Rating: (12)	Hello Yes I'm Using V Assistant Software For Commissoning With USB Cable I Don't Understand Why I Need Use USB While Drive Itself Having PN Port ? If I Need To Access Drive From Remote Location Through Network Means How Can I Access V90 ?
	Last edited by: KB The Beginner at: 6/16/2017 3:16:28 PM
Suggestion To thank Quote Answer

6/16/2017 3:19 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/11/2024 Posts: 22475 Rating: (3037)	Hello, Online Access to V90PN with Ethernet is only possible if the device is configured in TIA with HSP0185 on a S7-1500. V-Assist supports no Ethernet connection. Regards Christoph
	Last edited by: ChristophD at: 6/16/2017 3:19:33 PM
Suggestion To thank Quote Answer

6/16/2017 4:04 PM	Rate (0)
@KB@ Silver Member Joined: 7/30/2012 Last visit: 11/28/2024 Posts: 335 Rating: (12)	Hello Thanks For Your Reply!!! I Think Its Only Possible If I Use V90 As Technology Object With 1500... Is It Possible If I Use EPOS? ( Telegram 111)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on