V90 power fault and safety channel fault

Hello,

in the past I have used some S120 Siemens drive, and in a profibus message was present some error like this:

Power fault

Safety channel fault

is possible in V90 drive with profinet communication get this errors?

Thanks

Technology Team

Dear nowire,

You can download the SINAMICS communication blocks DriveLib for activation in TIA Portal

https://support.industry.siemens.com/cs/ww/en/view/109475044

With the V90 PN version fault codes are transfered via Telegramm 111 and SINA_Pos(basic positioner).

In closed loop speed control mode with SINA_Speed a little bit more programming has to be done in the PLC.

The fault message comes via a Bit in the status word. As reaction an acyclic single read order has to be done via SINA_Paras r0945 (error no) and r0949 (error code) each.

 Dear Technology Team,

in my TIA 15.1 project I not use a SINA_Pos lib, but I use a LAxis Ctrl Siemens lib. In this condition can I use SINA_Paras for read error no and error code?