Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

V90 STO safety

Created by: PLC0709 at: 8/3/2023 9:40 AM (2 Replies)

Rating (1)

Thanks 3

3 Entries

8/3/2023 9:40 AM	Rate (0)
PLC0709 Advanced Member Joined: 6/19/2018 Last visit: 11/25/2024 Posts: 161 Rating: (0)	Hi, guys I have V90 servo drive with TIA Portal v17 So I want to use STO telegram on the V90 Is it possible? Plz, let me know a reference Best regards, Max

Suggestion To thank Quote Answer

8/3/2023 10:42 AM	Rate (1)
Kahl Platinum Member Joined: 12/16/2012 Last visit: 12/9/2024 Posts: 654 Rating: (130)	Hi! We use hardwired STO on the V90. I think it is not possible to send it over Profisafe with the V90. At least that is it said in this 2019 doc: https://cache.industry.siemens.com/dl/files/233/109758233/att_986524/v1/motion-control-drives-D33-complete-English-2019-05.pdf
	ALPHR Technology Europe
Suggestion To thank Quote Answer

8/4/2023 9:49 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/20/2024 Posts: 5974 Rating: (820)	Hello Max, V90 just supports STO hardwired. You can connect V90 STO inputs directly to SIMATIC F-DQ outputs to make STO available on F-PLC. https://support.industry.siemens.com/cs/ww/en/view/109740693
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users 0_Einstein Martin472 Kahl

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on