V90 Supply

Hi,

As i know, the V90 has to be supplied with 3x400v.

On my demo case, i've seen that "L3" isn't connected. This demo case is made to be plug on 1x230v. So is it possible to supply the V90 with 1x230v? Or with 2x400v?

Thanks.

NB: I haven't found this information on the net.

There should be some identification / specification plate on the drive that states the requirements..

Some drives I know of (not specifically the V90), still works when using single phase input voltage.. but not at the rated torque.

Osld13

Hi,

As i know, the V90 has to be supplied with 3x400v.

On my demo case, i've seen that "L3" isn't connected. This demo case is made to be plug on 1x230v. So is it possible to supply the V90 with 1x230v? Or with 2x400v?

Thanks.

NB: I haven't found this information on the net.

Yes it works on 1 phase 230 volt. Refer attached sheet.

Have you look at V90 operating manual? Please follow this link.