Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

V90 (V10701) Servo ON not working in V-assistant (V1.05.01.03)

Created by: Ranganath at: 11/5/2017 9:45 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

11/5/2017 9:45 AM	Rate (0)
Ranganath Regular Member Joined: 8/13/2012 Last visit: 12/5/2024 Posts: 11 Rating: (0)	Dear Tech, Am configuring speed control mode in V90 drive (6sl3210-5fe10-4ua0) with the motor (1fl6042-1af61-0aa1). Drive is having V10701 firmware version. For configuring the drive using sinamics V-assistant of V1.05.01.03. When I give command SERVO ON through V-assistant with some RPM, motor is not running. During this there is no alarm. And also configured the Digital I/O and anaog input for running the motor from external this is also not working. Please help me in this
	Last edited by: Ranganath at: 11/6/2017 6:14:18 AM Last edited by: Ranganath at: 11/6/2017 7:48:53 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mandeep0806

11/6/2017 12:56 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 1/22/2025 Posts: 5985 Rating: (824)	Hello, do a factory reset and a new commissioning. 4.1 Selecting drive https://support.industry.siemens.com/cs/ww/en/view/109748598
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

11/6/2017 4:43 PM	Rate (0)
Ranganath Regular Member Joined: 8/13/2012 Last visit: 12/5/2024 Posts: 11 Rating: (0)	Dear Techteam, I tried with factory reset. But no use. My problem solved now, after giving 24V to CWL n CCWL. Now its working ok. In the earlier version no need to give 24V. ...sent from App

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on