Greetings all,

I`m struggling with with data exchange between Vacon 100 drive and PLC via Profinet connection.

I have GSD file, I don`t have faults in communications, Vacon is sending data, but PLC don`t see it and I have feeling that I have missed something, probably someone have some experience with similar case and can help me?

Please, see attached picture for more information.

Solved.

As I was thinking, it was something small.

I forgot to put '':P'' after tags when I was processing them to DB :-)

Good day,

Can i have a copy of your configuration in the PLC and Vacon side, im about to commission the same set up and it would be a great help to have a reference like yours.

thanks a lot.

would you please send to me the program 
i am tring connect PLC S7-1200 with Vacon 100

--Deleted E-Mail--

Hellow....

I'm facing with this too, I have a S1200 and vacon 100. But, in my case I have a ethernet switch between PLC and Vacon.

Can U send the blocks and a print of the HwConfiguration for take like example?

Tks

Hello

Would you do a great favor to sent me piece of that program to communicate to vacon 100, I have also S7 1200 and have difficulties to communicate

Br. Jari 

Hola, tengo funcionando dos variadores vacon por profinet mi correo es [snip] ...

JCMOTION

Hi jcmotiion,

Este es un foro donde usamos el inglés como idioma. Si tienes un problema, explícalo con más detalle.

______________

This is an english Forum so please use this language, if you want help.

Translation:

jcmotion

Hello, I have running two vacon drives by profinet my mail is [snip]

Best regards,

Noodles