Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

VarExim

Created by: Virago at: 5/16/2008 8:27 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

5/16/2008 8:27 AM	Rate (0)
Virago Posts: 79 Rating: (9)	I don't know where I can find VarExim.exe. I have install the Smart Tools, so I have Configuration Tools and I can manage Tags with Excel, but I don't have the VarExim tools. I have WinCC 6.2 SP2and I don't know if this tools still exists.
Virago Posts: 79 Rating: (9)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users beubeu84

5/16/2008 3:09 PM	Rate (0)
BadBit Posts: 125 Rating: (26)	Hi, You can install the tool with wincc setup. Select "Customized" klick the component "Smarttools" and select "Tag Export/Import" See "WinCC Information System> SmartTools > Tag Export/Import" The "WinCC Configuration Tool" includes the funktionality from "Tag Export/Import" see FAQ: http://support.automation.siemens.com/WW/view/en/22016422 Regards
BadBit Posts: 125 Rating: (26)	Last edited by: BadBit at: 5/16/2008 3:11 PM
Suggestion To thank Quote Answer

5/16/2008 3:38 PM	Rate (0)
Virago Posts: 79 Rating: (9)	I can't find "Customized" in the WinCC Setup, but I found the Smart Tools Setup on the WinCC CD : WinCC\Setup\Products\SC_SMARTTOOLS Thank's a lot
Virago Posts: 79 Rating: (9)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on