Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Variable ANY pointer Date_and_Time

Created by: Niek1230 at: 12/13/2013 10:47 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/13/2013 10:47 AM	Rate (0)
Niek1230 Posts: 1 Rating: (0)	Hello everybody, I have a problem with a indirect addressed Any Pointer. With a block move. The code below works fine but I want a Variable destination Byte The DB is always 8. [P#DB8.DBX [#BYTE_nr] .0 BYTE 8] is this possible? I have read a lot of Forums but i cant find. Or the result is not Correct. CALL RD_SYS_T date_type:=Date_And_Time RET_VAL :=#Ret_val_1 OUT :=#Temp_Date_And_Time CALL BLKMOV blk_type:=Any SRCBLK :=#Temp_Date_And_Time RET_VAL :=#Ret_val_1 DSTBLK :=P#DB8.DBX8.0 BYTE 8 Hopefully you can help me.
Niek1230 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

12/13/2013 12:36 PM	Rate (0)
smiffy Platinum Expert Joined: 1/17/2007 Last visit: 1/21/2025 Posts: 1548 Rating: (538)	See this thread.
	Programming today is the race between software engineers building bigger and better idiot proof programs, and the universe producing bigger and better idiots. So far, the universe is winning...
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on