Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

variable

Created by: Steve G. at: 5/22/2009 8:21 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/22/2009 8:21 PM	Rate (0)
Steve G. Posts: 10 Rating: (0)	Hi All Anybody know what variable $A_IN[20]==0 is? and where in the control I might be able to look at the value? Thanks in advance Steve
Steve G. Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

5/23/2009 9:59 AM	Rate (0)
Pee Ell Sea Posts: 672 Rating: (57)	HI, DB10.DBX187.3 It can be set in the plc or you can have fast inputs attached to the drive bus updating it. It you want to check it in program then try R1 = $a_in[20] the state of the value will be in R1
Pee Ell Sea Posts: 672 Rating: (57)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on