Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Vector grahics WinCC TIA V12 Professional

Created by: Per Olof at: 2/17/2014 3:58 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/17/2014 3:58 PM	Rate (0)
Per Olof Posts: 311 Rating: (3)	Hello, Does WinCC TIA V12 Professional support vector graphics ? I tried in create two files in wmf and emf and included them in a screen that i could resize, but the result is rubbish when I resize the screen! Can this be done in another way ? Regards Per Olof
Per Olof Posts: 311 Rating: (3)
Suggestion To thank Quote Answer

2/18/2014 7:51 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, WinCC supports the format .emf and .wmf https://www.automation.siemens.com/mdm/default.aspx?DocVersionId=56521909643&TopicId=39567497483 K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

2/18/2014 8:37 AM	Rate (0)
Per Olof Posts: 311 Rating: (3)	But that does not work :( When you rezise the picture is does not look good :(
Per Olof Posts: 311 Rating: (3)
Suggestion To thank Quote Answer

2/18/2014 4:07 PM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, I didn't try it with vector graphics so far but I always resize the graphics before adding to a project. I think that's the best way because you can't deform it by accident and they look best if you do it this way. K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Prof Picture Controls

Follow us on