Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

want to develope Wincc using old coros for S5 plc.

Created by: A9K at: 6/2/2010 9:39 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/2/2010 9:39 AM	Rate (0)
A9K Bronze Member Joined: 6/1/2010 Last visit: 4/22/2023 Posts: 158 Rating: (1)	I hav S5 plc 98u,with cp143. Now i want to communicate s5 with wincc,and the problem is ... Ihav all DB Addr. listof old online coros HMI [like eg: DB41/DR23] , [DB12,DL36]. NOW for wincc i need S5 plc comments bcoz for developement first of all i hav to know about each and every bit allocation.and in coros developement they used addresses like upper example. once again like: DB41,DR23 {data right 23 has 8 bits} so if this is used for digital signals 'Binary tag' which bit for what signal i dont know ...and thats why i cant create tagsfor wincc like [DB41,D23.4] OR [DB12,D23.7]. bcoz in our s5 plc comments r not available. 1] so where from i will get this comments in step5 s5 plc software or how i will get this tell me some way. 2] Andmay i use cp1613 card at Wincc HMI side.[PC]. Pls concentrate for ur friend. waiting forany reply ........ thanks in advance.
	A9K
Suggestion To thank Quote Answer

6/2/2010 10:43 AM	Rate (0)
KSN Platinum Member Joined: 8/25/2006 Last visit: 6/1/2023 Posts: 2181 Rating: (273)	I think you may find some information about migration to WinCC here.

Suggestion To thank Quote Answer

6/5/2010 8:57 AM	Rate (0)
yokiar Posts: 36 Rating: (3)	Hi A9K, I think you have made twotread for the same issue. Aren't you? /tf/WW/en/Posts/44311#top
yokiar Posts: 36 Rating: (3)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on