Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

When try to press on a button, it says no input with a warning triangle

Created by: Azkaban at: 3/8/2018 9:57 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/8/2018 9:57 AM	Rate (0)
Azkaban Bronze Member Joined: 2/12/2018 Last visit: 1/18/2023 Posts: 224 Rating: (4)	I found something on my computer called Sm@rtClient, and know I can access my HMI on my PC. But another problem is that when I try to press on a button, is says no input with a warning triangle. Unless I press like 5 times really fast, then I can use the input. Do you know what is wrong? Azkaban Hi I have a HMI in my factory, that I want a remote access to up in my office. Is this possible? I have read a little aboutSm@rtServer, but I can't get this to work. I followed a toturial on YouTube for the configuration of the HMI. Then I put my LAN-cable from my PC to the HMI, and searched for the HMI's IP-adresse in a webbrowser, but it didn't find anything. Do you guys know, if this is possible? Here are my details: TIA Portal Version V14 SP1 WinCC Advanced V14 SP1 TP1200 Comfort CPU 1513-1 PN Best regards ------------------------------------------------------------------------------------------ Split from Remote access.
	Last edited by: Jen_Moderator at: 3/12/2018 10:36:43 AM New subject after splitting. Inserted quotation. Please don't forget to rate :)
Suggestion To thank Quote Answer

6/6/2018 8:27 AM	Rate (0)
Jay. Posts: 1283 Rating: (103)	Are you still facing this problem? The problem is that if some one is accessing the physical HMI, then you will not be able to command through smart client. You need to wait for the user to stop using the HMI physically and then you can access it. Multiple users at the same time is not permitted and that is the reason for No input with the warning triangle. Jay
Jay. Posts: 1283 Rating: (103)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on