Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Where form the F203.3 at the programe

Created by: Limin at: 2/3/2008 3:33 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

2/3/2008 3:33 AM	Rate (0)
Limin Posts: 10 Rating: (0)	Dear sir, our have a S5-135 CPU928B system, the attachment is the programe, at the pb214, have use the F203.3,but i don't konw where from? the pb214 is use motor position control, the motor position feedback is gray code encoder. thank you! Limin
Limin Posts: 10 Rating: (0)	Last edited by: CS Moderator at: 04.02.2008 12:29 I deleted th attachment because of suspicion of virus.
Suggestion To thank Quote Answer

2/4/2008 4:36 AM	Rate (0)
Navnag Platinum Expert Joined: 11/21/2007 Last visit: 9/25/2024 Posts: 2325 Rating: (308)	Dear Limin First of all pl. be careful. The attachment contains a virus " W32/HLLP.Philis.ini " The Flag F203.3 in PB214 is Bit-3 of the Encoder value converted from Grey Code to Binary. ( Possibly it is being generated repeatedly after a perticular movement of the encoder. ) Everytime Bit-3 ( 2E3 ) turns 1 ( After a cetain fixed rotation of the Encoder ) F 203.3 will turn high. Hope this helps. Regards Navnag
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

2/4/2008 7:10 AM	Rate (0)
Limin Posts: 10 Rating: (0)	Dear Navnag, I'm sorry for the virus, i don't know the file including the virus. Thank you for your help. I know the F203.3 is from the encoder now, the encoder is output the digital signal to program, FB100 function block will the digital signal convert to FW200( Gray code), again convert to FW202(Binary code). Regards, Limin
Limin Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

2/4/2008 11:20 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 10/9/2024 Posts: 4108 Rating: (195)	Hello navnag, we checked the file with the actual OfficeScan version, but we couldn't find a virus. Which tool and which version do you used for finding the virus? Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

2/4/2008 11:59 AM	Rate (0)
Navnag Platinum Expert Joined: 11/21/2007 Last visit: 9/25/2024 Posts: 2325 Rating: (308)	Hi I am Using McAfee Security Centre V 8.0 and Virusscan V 12.0 McAfee detected the virus when I unzipped the file. Just to be sure, I tried it again, Screenshot of McAfee msg is attached. Best Regards Navnag Attachment McAfee_Msg.jpg (330 Downloads)
	Last edited by: Navnag at: 04.02.2008 12:05 There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

2/4/2008 12:30 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 10/9/2024 Posts: 4108 Rating: (195)	Hello Navnag, it's a strange behaviour. I tested it with Antivir but also this program couldn't find a virus. To be sure that the users don't get troubles, I have deleted the attachement. Many thanks for your hint! Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on