Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Where set button press event?emergency

Created by: Integral system at: 10/8/2007 5:50 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

10/8/2007 5:50 AM	Rate (0)
Integral system Posts: 10 Rating: (0)	hello ,everyone, I want to set DB51.DBX0 through press button, when i release, this bit must Reset. but Ican not findwhere to write DB51.DBX0 in WINCC FLEXIBLE COMPACT 2007. thank you, it is very emergency
Integral system Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

10/8/2007 9:40 AM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (120)	Hi, i work with flexible advanced but the following function should also be possible in compact. => Properties of the button > Events > Press > "System functions" Edit bits > SetBit or Resetbit regards,

Suggestion To thank Quote Answer

10/8/2007 10:06 AM	Rate (0)
Integral system Posts: 10 Rating: (0)	thank you. THIS problem has been solved, but I still have a problem. HOW to change back colour of button, because my machine run in different mode, I want the active mode button have different colour, thanks
Integral system Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

10/8/2007 1:22 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 9/14/2023 Posts: 8592 Rating: (1132)	Hi, Use the properties of Button. Go to Properties of Button -> Animations -> Appearance -> Enable it and choose a tag which changes the color. Best regards, Wizard

Suggestion To thank Quote Answer

8/11/2009 6:44 PM	Rate (0)
TZOULIS Posts: 3 Rating: (0)	THIS WORKS IN FACEPLATES?
TZOULIS Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

8/12/2009 8:48 AM	Rate (0)
Manfred Gold Member Joined: 5/28/2008 Last visit: 12/8/2015 Posts: 901 Rating: (136)	Hello TZOULIS, you can use the funktions in faceplates an in a normal visualisation... regards manfred

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on