Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Which SIEMENS TP should I use?

Created by: DinaTP at: 7/9/2008 3:36 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/9/2008 3:36 PM	Rate (0)
DinaTP Posts: 27 Rating: (0)	Dear All, Recently i investigated an AB system with AB CPU SLC/03 and AB HMI communicating via DF1 protocol. The HMI found to be defective i need to replace the AB HMI with Siemens HMI TP series, you please prefer which one will be suitable and shall i use the existing cable (DF1)for communication or i need any special hardware.Please suggest. Thanks & Regards, Dina.
DinaTP Posts: 27 Rating: (0)	Last edited by: CS Moderator at: 7/10/2008 11:40 PM new subject after splitting
Suggestion To thank Quote Answer

7/11/2008 3:01 PM	Rate (0)
ZAK Gold Member Joined: 5/8/2006 Last visit: 2/22/2023 Posts: 1085 Rating: (76)	Hi, maybe this FAQ will help you: http://support.automation.siemens.com/WW/view/de/18797249/0/en Bye

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on