Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinAC Basis V4.1 with Profibus conection with IO working on laptop PC

Created by: gras at: 12/22/2006 9:57 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

12/22/2006 9:57 AM	Rate (0)
gras Posts: 11 Rating: (0)	Hi Do anybody know how to use WinAC Basis V4.1 working on common laptop PC (not Simatic programmer) for temporary replacement of PC577 Panel PC with CP5611 Profibus DP card? The problem is that CP5611 for laptops (PCMCIA version for example) is not available as I know. Weuse ET200M IO modules connected with WinAC station via Profibus DP.
gras Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

1/8/2007 11:08 AM	Rate (0)
Chris Silver Member Joined: 8/31/2005 Last visit: 10/24/2024 Posts: 217 Rating: (41)	Hi! As far as I know, there is no possibility to use WinAC RTX as a DP master on a notebook using a PCMCIA-PROFIBUS card (e.g. CP 5511). Only the SIMATIC Field PG has an integrated CP 5611, which can be used as a DP master
	Greetings, Chris
Suggestion To thank Quote Answer

1/19/2007 2:41 PM	Rate (0)
gras Posts: 11 Rating: (0)	Thanks a lot. Bogdan
gras Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

6/7/2007 11:50 PM	Rate (0)
plc_user Posts: 57 Rating: (0)	Won' t it be possible with future releases of WinAC, and also not with Simatic Net installed?
plc_user Posts: 57 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on