Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinAC RTX 2010 installation on Win7

Created by: Fabio068 at: 10/22/2013 5:42 PM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

10/22/2013 5:42 PM	Rate (0)
Fabio068 Bronze Member Joined: 7/16/2008 Last visit: 8/29/2023 Posts: 83 Rating: (2)	Hi I'm trying to install WinAC RTX 2010 on a VMware guest Win7 32bit SP1. Setup start with "RT2009 RTX Runtime" installation. After this ask to restart Pc. After restart installation is resumed but after few second ask for a new restart and this for all the other times with results that installation install just "RT2009 RTX Runtime". Anyone with the same problem? Thanx

Suggestion To thank Quote Answer

10/23/2013 10:08 AM	Rate (0)
Pakeki Regular Member Joined: 9/17/2013 Last visit: 2/28/2023 Posts: 20 Rating: (2)	Hi Fabio, have you tried deleting and reinstalling WinAC? Perhaps there was a problem at Installation. WinAC RTX ->Win7 32 bit without VM is no problem, but I have never tried in a VM. regards Pakeki

Suggestion To thank Quote Answer

10/23/2013 2:20 PM	Rate (0)
Fabio068 Bronze Member Joined: 7/16/2008 Last visit: 8/29/2023 Posts: 83 Rating: (2)	Pakeki I tried to install in a clean machine. I tried to install in a machine with step 7 V5.5 installed. I tried to deinstall what it install without complete installation. I tried, browsing the CD, to install separatly WinAC. No result Thanx

Suggestion To thank Quote Answer

10/23/2013 3:15 PM	Rate (0)
Pakeki Regular Member Joined: 9/17/2013 Last visit: 2/28/2023 Posts: 20 Rating: (2)	Hello Fabio, i just installed WinAC RTX 2010 in a VM with Win7 32-bit Ultimate. No problems at the installation und it works fine. If nothing works in this VM, perhaps there was a failure setting up the VM? Have you tried to install the complete VM again. regards Pakeki

Suggestion To thank Quote Answer

10/23/2013 3:23 PM	Rate (0)
Fabio068 Bronze Member Joined: 7/16/2008 Last visit: 8/29/2023 Posts: 83 Rating: (2)	Pakeki I tried many times. Im using VMWare 10.0 and Win7 x86 professional with all update from Microsoft. Thanx

Suggestion To thank Quote Answer

10/23/2013 3:49 PM	Rate (0)
Pakeki Regular Member Joined: 9/17/2013 Last visit: 2/28/2023 Posts: 20 Rating: (2)	Fabio086, have you used the same user to log in after the restart in the installation? Do you have admin rights at host and VM client? regards

Suggestion To thank Quote Answer

10/23/2013 4:00 PM	Rate (0)
Fabio068 Bronze Member Joined: 7/16/2008 Last visit: 8/29/2023 Posts: 83 Rating: (2)	Pakeki User, user's rights is Ok. Im preparing a virtual machine with Virtual Box. Have you experience in Virtual Box? I let you know. Thank you Ciao

Suggestion To thank Quote Answer

10/24/2013 9:03 AM	Rate (0)
Fabio068 Bronze Member Joined: 7/16/2008 Last visit: 8/29/2023 Posts: 83 Rating: (2)	Feedback I tried to install WinAC RTX 2010 on a VM Virtual Box 4.3 with Win7 32 Professional. Installation freeze just started.

Suggestion To thank Quote Answer

10/24/2013 5:33 PM	Rate (0)
taxflor Silver Member Joined: 1/26/2011 Last visit: 8/11/2022 Posts: 243 Rating: (67)	Hello, i know that you have to configure your VMWare when you want to use WinAC RTX in a VMWare and the host is 64Bit Operating system. /tf/WW/de/Posts/89078 Mabye this topic can help you. Try to do this and afterwards start the installation again. Typically it has to work! give us feedback if this could helped you. greetings, bigfoot

Suggestion To thank Quote Answer

10/24/2013 6:32 PM	Rate (0)
Fabio068 Bronze Member Joined: 7/16/2008 Last visit: 8/29/2023 Posts: 83 Rating: (2)	bigfoot I already seen this post and tried suggested solution (even if the problem look different). Unfortunatly no result, same problem Thank for your interest Ciao

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on