Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

wincc 2008 flex. and mp 277 10" touch

Created by: DsStar at: 9/27/2011 9:11 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

9/27/2011 9:11 AM	Rate (0)
DsStar Member Joined: 9/27/2011 Last visit: 9/25/2023 Posts: 3 Rating: (0)	Hello! I need help. I can not unload a project from the panel in the laptop. Settings are correct. The connection works. WINCC an error: "Could not find the pdz file". After the connection is broken. The project is in the panel has been working for 2 years. If you attempt to unload the program ProSave (Backup) - unloaded image Windows, and starts unloading Flash, comes to about 90%, and more on the panel message "connect to host ..", and the computer hangs. The project is therefore not preserved. Tell me, what to do with this problem. Thank you for your understanding.

Suggestion To thank Quote Answer

9/27/2011 9:34 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 9/29/2023 Posts: 8593 Rating: (1132)	Dear Ds Star, Perhaps this link might help: how do you back transfer the projects of an operator panel and what should you watch out for? Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Sandman

9/27/2011 1:37 PM	Rate (0)
DsStar Member Joined: 9/27/2011 Last visit: 9/25/2023 Posts: 3 Rating: (0)	I looked at the link. I found a document that is right for me. Read. BackUp made on the flash card. When reading on the PC on the map is still no file "SAVEDATA.PDZ". What should I do?

Suggestion To thank Quote Answer

9/29/2011 12:03 PM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 9/21/2023 Posts: 1557 Rating: (161)	Hello, if there isn`t a pdz file, you haven`t got a copy of the original project. In this case you can just do a backup of the panel wich be be restored at a panel (same type of panel). A backup can not be edited! best regards

Suggestion To thank Quote Answer

10/5/2011 7:38 AM	Rate (0)
DsStar Member Joined: 9/27/2011 Last visit: 9/25/2023 Posts: 3 Rating: (0)	Hello, Thanks for your help! I figured out! Backup done by means of the panel, and the original project promised to send colleagues. best regard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on