Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC 6.0 Alarm logging

Created by: novice at: 11/27/2007 8:47 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/27/2007 8:47 PM	Rate (0)
novice Posts: 2 Rating: (0)	Hi All, I have wincc 6.0 running perfectly upto a week ago. I switched on wincc started to load but when it reached alarm logging it just sits there at 75% loaded. If I disable alarm logging in start up when it then reaches tag logging the same happens just hangs at 60%, But when I disable tag logging everything works great. What have I lost please help me
novice Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

11/29/2007 11:48 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, check the Windows and WinCC Diagnostic files See the Links http://support.automation.siemens.com/WW/view/en/22089969 http://support.automation.siemens.com/WW/view/en/22892165 But check first, that your harddisk is not full April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

11/30/2007 5:08 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, If you still have problems, check your diagnose folder... if you have trouble figuring the diagnose out, please post the folder here... Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on