Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WINCC 6.0 SP4 TAG LOGGING PROBLEM

Created by: Yalcin at: 3/9/2007 8:19 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/9/2007 8:19 AM	Rate (0)
Yalcin Experienced Member Joined: 12/25/2006 Last visit: 3/29/2022 Posts: 40 Rating: (1)	I have a Wincc v6.0 sp.4 project. My project need arsiv so I selected tag logging but when I start runtime it is go to stop when tag logging began... How I correct this problem... This is immediate... Yalcin YILDIZ ---------------------------------------------------- automation dept. programmer.. emesis trade co....
	automation and machine desing, project manager, drawing,programing, and automation responsable
Suggestion To thank Quote Answer

3/9/2007 12:40 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi which Wincc version are you using? Did you activate Tagloggin in WinCC >Computer > properties> Startup? Could please attach your logfiles? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

3/9/2007 1:04 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Also.. do you have any other Siemens software in that same computer? Take a look at this link, since this has been discussed before.
Danielle Posts: 1275 Rating: (123)	Last edited by: Danielle at: 09.03.2007 13:10
Suggestion To thank Quote Answer

3/9/2007 8:58 PM	Rate (0)
Yalcin Experienced Member Joined: 12/25/2006 Last visit: 3/29/2022 Posts: 40 Rating: (1)	Nemo Hi which Wincc version are you using? Did you activate Tagloggin in WinCC >Computer > properties> Startup? Could please attach your logfiles? nemo Thanj you for your reply. I corected problem... this is net framework problem..I instaled it and corrected problem.. what is interesting betveen tag logging and net ameworkf.
	automation and machine desing, project manager, drawing,programing, and automation responsable
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on