Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC 6.2 Dynamic Dialog question

Created by: Jeebs at: 4/10/2008 3:47 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/10/2008 3:47 PM	Rate (0)
Jeebs Posts: 218 Rating: (28)	Hi, My question might have a simple answer, but I just can't seem to get it right. I have an IO-field. The operator enable fo this field is linked to a tag. According to the value of this tag, you can access/change the IO-field. Dynamic Dialog is used with following expression: (.B02==16) Then true = enabled False = disabled. My problem now is I need to add numbers to the expression. Should be something like: (.B02==2) OR (*.B02==16) But this expression isn't accepted. Is it possible to do this? or do I need to go scripting? (Don't want scripting, was asked to minimise use of scripts) Thnx for reading Jeebs
Jeebs Posts: 218 Rating: (28)	Last edited by: Jeebs at: 4/10/2008 3:47 PM
Suggestion To thank Quote Answer

4/10/2008 4:02 PM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Hi, Don't have access to wincc right now but try: ((.B02==2) \|\| (.B02==16))
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

4/10/2008 5:54 PM	Rate (0)
ZXC-SLO Bronze Member Joined: 3/21/2007 Last visit: 7/12/2024 Posts: 29 Rating: (3)	You can also use: * - AND + - OR - - XOR / - NAND regards

Suggestion To thank Quote Answer

4/11/2008 12:00 PM	Rate (0)
Jeebs Posts: 218 Rating: (28)	Hi, Didn't have the opprotunity yet to test it, but....How/where can one find this information? I've searched but didn't find anything related to it. Just curious as to where one might learn these things. :D
Jeebs Posts: 218 Rating: (28)
Suggestion To thank Quote Answer

4/11/2008 12:56 PM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	* - AND + - OR - - XOR / - NAND can be found within the dynamic dialog itself. The \|\| are C-script related operands. And as a dynamic dialog is programming in c-script you can find out by trying. Normally, read the forum and the help files in wincc and you are a whole way there. with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on