Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC 7.0 Group display error at startup

Created by: gebruiker1 at: 2/16/2009 9:23 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/16/2009 9:23 AM	Rate (0)
gebruiker1 Posts: 8 Rating: (0)	Hello everybody, I started a project with wincc 7.0. I have a simple screen with a couple of buttons and a faceplate. There is also a alarm display. After 2 minutes after starting the project i get the error: Group display error at startup. Errornumber 1011000. Does anyone knows what this means?
gebruiker1 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

2/16/2009 10:26 AM	Rate (0)
cumulus Platinum Member Joined: 9/27/2007 Last visit: 12/18/2020 Posts: 993 Rating: (102)	Hi, is this really the corect message number? Cause it should bie 8 digits maybe this FAQ helps http://support.automation.siemens.com/WW/view/en/22029461
	Learn more about visualization - visit the HMI courses of Siemens AG! siemens.com/sitrain Basic course WinCC (TIA Portal) machine-based https://support.industry.siemens.com/cs/ww/en/view/109758624 Advanced course WinCC (TIA Portal) machine-based https://support.industry.siemens.com/cs/ww/en/view/109758626 Basic course WinCC Professional https://support.industry.siemens.com/cs/ww/en/view/109758618 Basic course SiVArc (Auto. Generation of HMIs) https://support.industry.siemens.com/cs/ww/en/view/109758628 Basic course Energy Suite https://support.industry.siemens.com/cs/ww/en/view/109755577
Suggestion To thank Quote Answer

2/16/2009 10:36 AM	Rate (0)
gebruiker1 Posts: 8 Rating: (0)	The alarm number is really 1011000.
gebruiker1 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on