Hello WhyZix,

I would like to know how to do that, I've built some controls in .Net but we're using Advanced not professional, those can be easily converted to ActiveX controls but I need your help to know how to use them. 

whyzix

A few years ago, Siemens released an add-on called camcontrol,

Monitoring via webcam and SIMATIC HMI comfort panel

It is only used in TIA V13,

Later, in TIA V14 and later, this control has become built-in,

There is no additional control.

After several years of analysis and exploration,

Additional controls are available.

WINCC runtime advanced programs running on PC and programs running on comfort panel,

Most of the code is shared,

And a lot of the code is based on QT.

At present, the additional controls as shown in the above figure can be run on a PC,

Because there is no actual comfort panel in hand,

There is no way to test.

After developing these additional controls,

I find,

I can't meet the needs of all users alone,

The core value of this thing is that it opens a door,

A door that people used to think was closed.

If anyone can develop ActiveX themselves,

You want to embed your own controls into WinCC runtime advanced,

Using the internal data of WinCC runtime advanced,

Sending an event to Wincc Runtime Advanced,

Please contact me.

几年前，西门子曾经发布过一个名叫CamControl附加控件，

通过网络摄像机和 SIMATIC HMI Comfort Panel 进行监控

只是在TIA V13 中使用，

后来在TIA V14以及之后的版本中，这个控件已经变成是内置的了，

也就再没有附加控件一说了

经过几年的分析和探索，

附加控件这个功能还是可以用的。

Wincc Runtime Advanced 运行在PC机上的程序和运行在 Comfort Panel上的程序，

大部分代码是共享的，

而且有很大一部分代码是基于QT的。

目前如上图所示的附加控件都可以在PC机上运行，

因为手里没有实际的Comfort Panel，

还没有办法试验。

开发了这些附加控件之后，

我发现，

我一个人是没有办法满足所有的用户的需求的，

这个东西的核心价值是打开了一扇门，

一个以前大家都以为关着的门。

如果谁自己会开发ActiveX,

想把自己的控件嵌入到Wincc Runtime Advanced中，

使用Wincc Runtime Advanced 内部的数据，

向Wincc Runtime Advanced发送事件，

请联系我。

------------------------------------------------------------------------------------------
Split from YZX.TIA.AdditionalControls.