Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Alarmlogging and Tagname issue

Created by: Nesnaj at: 7/23/2008 3:03 PM (6 Replies)

Rating (0)

Thanks 0

7 Entries

7/23/2008 3:03 PM	Rate (0)
Nesnaj Posts: 15 Rating: (0)	Is it possible in a easy way to show the used alarm-tag in the alarm list. i can't select it anywher !!!! at this time i have created a user text blok an type(copied) de tagname in there. i hope anywone knows a simple solution for this. With kind Regards Ron P.s. i am using WinCC V6 SP2
Nesnaj Posts: 15 Rating: (0)	Last edited by: Nesnaj at: 7/23/2008 3:05 PM
Suggestion To thank Quote Answer

7/23/2008 5:58 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Nesnaj .... Is it possible in a easy way to show the used alarm-tag in the alarm list. ... In WinCC Alarm Control, Properties, Message block tab, User text block, Source field. See attachment. Attachment Dokument1.pdf (139 Downloads)
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

7/24/2008 9:07 AM	Rate (0)
Nesnaj Posts: 15 Rating: (0)	Hi Phantom75. This is not going to work the user text block is a free text block and there fore there is no standard information in the block except wen you put it in yourself. With kind regards
Nesnaj Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

7/24/2008 6:01 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Hi Nesnaj, I did not completely understand what exactly you are looking for. Can you explain (with screen captures etc.)? BTW, nice catch! Regards, Phantom
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

7/25/2008 12:48 AM	Rate (0)
Anchobi Posts: 139 Rating: (25)	As far as I know I do notthink there is an automated way of doing this. Easiest way, is to create user text and either in alarm logging or even better in excel config tool just copy and paste accros the tag . Any automation of the task if it were possibleI imagine will be as much or more effort than this
Anchobi Posts: 139 Rating: (25)
Suggestion To thank Quote Answer

7/25/2008 8:52 AM	Rate (0)
Nesnaj Posts: 15 Rating: (0)	Hi Phantom, See attacht file with screen capture. i want to show the message tagin section connection displayd in the runtime alarm control. I think that Anchobi is right about this topic and i am going to test the config exel tool Attachment Alarm_image.jpg (119 Downloads)
Nesnaj Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

12/18/2014 7:34 AM	Rate (0)
Petja Posts: 10 Rating: (1)	WhiWinCC V7.3 lets you copy&paste all tag name column into point of error column, which takes only 1min. While still not as good as an automatic solution (you have to remember to do it), it is now much faster.
Petja Posts: 10 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Alarms Messages

Follow us on