Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC and modbus

Created by: Darius at: 5/23/2007 1:00 PM (27 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2 | 3; |

28 Entries

Entries per page: 10 | 20 | all

5/23/2007 1:00 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hello, I need to use modbus driver in WinCC. I have no PLC, modbus devices is connected directly to PC with WinCC through RS485 PC card. I need some drivers. I found in FAQ that I must use http://www.allmendinger.de, but here I saw only downloadable helps. So is there any modbus drivers in the net and how to buy them? Maybe there is any Siemens drivers? Thanks. Best regards, Darius
	Best regards, Darius
Suggestion To thank Quote Answer

5/23/2007 1:17 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi I searched WinCC help for modbus and you are right with WinCC V6 the modbus-driver is only available at allemendinger. nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

5/24/2007 4:51 PM	Rate (0)
ALI S Posts: 9 Rating: (0)	For V6 youcan alsouse opc server like Softwaretoolbox or Kepserver or cyberlogic besidesallmendinger's modbus ASCII/RTU channel driver for WinCC V6 which is not free.OPC servers are also not free but u can get demo.
ALI S Posts: 9 Rating: (0)	Last edited by: ALI S at: 24.05.2007 17:01
Suggestion To thank Quote Answer

6/5/2007 8:06 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hello, In addition I can say that there is modbus OPC server from "Automated solution" for a very reasonable price. I have allready tried it with WinCC 6.0 SP4 and it works perfect. Best regards, Darius
	Best regards, Darius
Suggestion To thank Quote Answer

6/13/2007 2:38 PM	Rate (0)
Filo Posts: 54 Rating: (2)	I' ve imported the drivers for modbus forom WinCC v5 to v6 and it is working.
Filo Posts: 54 Rating: (2)
Suggestion To thank Quote Answer

6/14/2007 8:45 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hello, It's ok. I can do that, but is it legal? Do I need any licenses or no? Thanks. Best regards
	Best regards, Darius
Suggestion To thank Quote Answer

6/15/2007 9:02 AM	Rate (0)
Filo Posts: 54 Rating: (2)	Darius Hello, It's ok. I can do that, but is it legal? Do I need any licenses or no? Thanks. Well I can't answer this question. I've done this only as an experiment and it is working. But is it legal I don't know. If you are interested I can send you the files form WinCC v5 that you need for the Modbus driver.
Filo Posts: 54 Rating: (2)
Suggestion To thank Quote Answer

6/20/2007 12:21 PM	Rate (0)
Buzz LightYear Experienced Member Joined: 5/25/2007 Last visit: 9/27/2024 Posts: 83 Rating: (3)	Hello: I have the same question like this,could you send me the files that to import v5 modbus driver to v6 thank you best regards BuzzLightYear
	Last edited by: O_Moderator at: 10/15/2010 7:46 AM contact data deleted
Suggestion To thank Quote Answer

7/17/2007 3:25 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hello, I've been away some time and now I'm back :) I have asked Siemens support is it legal and support said that if it is working I can use it legally. I have these files too and I will send you. Best regards,
	Best regards, Darius
Suggestion To thank Quote Answer

7/18/2007 9:20 AM	Rate (0)
Buzz LightYear Experienced Member Joined: 5/25/2007 Last visit: 9/27/2024 Posts: 83 Rating: (3)	Dear Darius: thanks for your help,it's working ok. best regards BuzzLightYear
	Last edited by: O_Moderator at: 10/15/2010 7:47 AM contact data deleted
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Communication (OPC, S7, OtherSystem)

Follow us on