Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC C-actions are not triggered

Created by: Teukros at: 9/1/2008 4:58 PM (12 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

9/2/2008 10:50 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	You don't need to roll back to old version. Just uninstall WinCC and install it again allready v6.2 SP2. Thats all, but firstly try to generate just new simple project and create one C action here and see if it is trigered or not. If not - reinstall, if so - something went wrong with project itself.
	Best regards, Darius
Suggestion To thank Quote Answer

9/2/2008 10:53 AM	Rate (0)
Teukros Posts: 9 Rating: (0)	Thank you Darius, This is a live system. That is why I have mentioned clean installation of everything. However, thanks again!
Teukros Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

9/2/2008 10:55 AM	Rate (0)
Palmerita Posts: 102 Rating: (13)	I agree with Darius... try reinstalling from scratch this new version... it is always better to try to keep up to date with the software. in the worst of the cases you can justify your professionalexistence a couple of weeksmore Best of lucks!!!!!
Palmerita Posts: 102 Rating: (13)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on