Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Client and Server connection

Created by: Jessica at: 5/27/2009 11:04 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/27/2009 11:04 AM	Rate (0)
Jessica Posts: 6 Rating: (0)	Dear All, I have a system using WinCC V7.0 with 2 redundant OS server and 1 client, I configured all my project in Step 7 using integrated mode, after createda client station and assigned OS server, I can download both WinCC server and client to the respective PCs. Now in runtime, ServerPC has full connection to PLC, tag values can be displyed, client pc with client project can display WinCC graphics/pictures, but not with tag value. All IO fileds are displayed with dark grey background, means no connection. Can anyboby advise me any possible reason? Thanks in advance!
Jessica Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

5/28/2009 9:55 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Have you loaded the server data (package)in the client? Also, check the status of client connections in the server (WinCC Explorer/Tools). Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

5/29/2009 5:20 AM	Rate (0)
Jessica Posts: 6 Rating: (0)	Yes, I did load the server data to client station. Now I have solved this problem by recerating a new client project, and repeat same procedure. Thanks for help.
Jessica Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on