Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC communication with S5

Created by: schreyer at: 7/10/2006 10:01 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

7/10/2006 10:01 AM	Rate (0)
schreyer Posts: 65 Rating: (3)	Hi all, I have a big problem now trying to get WinCC V6.0 sp4 to communicate with S5 redundancy system. Can anyone give me an idea how to go about configuring the Station configurator and the Simatic Manager PC station configuration? I had tried for 2 full days just to find ways and means to set up the communications. Pls help me out here.
schreyer Posts: 65 Rating: (3)
Suggestion To thank Quote Answer

7/10/2006 10:25 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Sorry I cannot help with this but have you tried contacting the hotline? Maybe they can help. You can do so using the Support Requestlink.
	Last edited by: salma at: 7/10/2006 10:26 AM Or maybe someone else has done this before ? Anyone ?
Suggestion To thank Quote Answer

7/10/2006 10:32 AM	Rate (0)
schreyer Posts: 65 Rating: (3)	Then do you know about how to export out .ldb files created using COML_TF? How?anyone with any ideas to share? Pls feel free to post as i am willing to try everything. Thank and Regards Schreyer
schreyer Posts: 65 Rating: (3)
Suggestion To thank Quote Answer

5/27/2007 9:01 AM	Rate (0)
Jr. Leow Posts: 7 Rating: (0)	Dear Schreyer, Have you manage to setup the communication? Can you give me some guidelines as i am facing problem with communicating with SIMATIC S5-115H as well, the tag write to PLC takes about 10s before it was write into the PLC? Have you face the problem before? Please help. Thank you. Best regards, Leow Kien Giap
Jr. Leow Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

5/29/2007 8:08 PM	Rate (0)
CCJohnston Posts: 6 Rating: (0)	Good afternoon, there is a method to address a redundant connection within a S5 155H. I have seen this application in the past. Unfortunately I cannot give you the exact fix as it is proprietary. The basic concept is to direct a character byte to the online CPU. This solution is heavily scripted. I would recommend that you contact the help desk and hire the experts to create the proper setup for you. I hope at least the knowledge that there is a solution helps
CCJohnston Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on