Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Wincc Configuration

Created by: n_n at: 6/28/2007 11:11 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

6/28/2007 11:11 AM	Rate (0)
n_n Posts: 4 Rating: (0)	Hello, How to connect VB script to use in project. Please advice the method to solve it Best regards, n_n
n_n Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/28/2007 1:24 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, WinCC has a Global Script tool, for scripts which, as the name says, are global for the project. Scripts can be added for each object in Graphics designer, if you need specific scripts for each objects. BTW, it's VBS... Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

7/2/2007 4:10 AM	Rate (0)
n_n Posts: 4 Rating: (0)	Thank you very much for your reply. I try to write vbs code in Graphic Designer to write or read tag in my project, it's work but when I try to coding in Global Script to write tag value, it isn't work (the vbs code from WinCC V6 VBS Reference) Thank you in advance.
n_n Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/2/2007 5:08 AM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi please post your code here in the forum, are you using a trigger for your global script?? please post all files in the folder ..\wincc\diagnose here as well nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

7/2/2007 7:01 AM	Rate (0)
n_n Posts: 4 Rating: (0)	I think I do something wrong about Global script because i don't use trigger. Please post trigger example in global script. Thank you very muchin advance
n_n Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/2/2007 2:57 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, See the FAQ: http://support.automation.siemens.com/WW/view/en/22537448 Best regards April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

7/4/2007 2:14 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, Scripts in Graphics designer also have triggers, these atriggers are roughly what would start the script. When they're configured as events (e.g. mouse events), the trigger is the mouse click.... When you have a global script you still need to set when this script will run. Actions need triggers (which can be timers or tags). Project modules must have their execution "called", which can be done, for instance, when you click an object in runtime. I've put a little .doc showing where to set the trigger for an action. Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on