Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Date and/or Time Control

Created by: omerfaruk at: 5/8/2009 5:30 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/8/2009 5:30 PM	Rate (0)
omerfaruk Posts: 1 Rating: (0)	I want to changesome parameters ofonline trend control with tags. This parameters are time axis begin and end time. I want to set parameters with I/O field on runtime graphic picture. How i can configure this tags which are in the I/O fields? Otherwise i want to learn; How i must transfer datas date and/or time format between S7 and WinCC? How i can configure WinCC tags and S7 data blocks register? Regards.
omerfaruk Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/11/2009 9:41 AM	Rate (0)
jaromir Bronze Member Joined: 3/6/2008 Last visit: 2/5/2021 Posts: 139 Rating: (18)	I recommend you to use the DateTime picker OCX for inputing time. It is standard OCX from Microsoft. The second see the link https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=35947175&caller=nl Best regard Jaromir
	Jaromir Hladik DEL a.s. Strojirenska 38 591 01 Zdar nad Sazavou http:\\www.del.cz
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on