Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WINCC error 0x80070035

Created by: muneeb at: 7/12/2006 11:08 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/12/2006 11:08 AM	Rate (0)
muneeb Experienced Member Joined: 1/17/2006 Last visit: 2/7/2022 Posts: 171 Rating: (0)	Dear Readers i am facing one problem while opening a new or existing project in WINCC V6. when i create a project or try to open any existing project it gives me the following message. HREsult 0x80070035 Network path not found what does it mean and what is the remedy to this problem?

Suggestion To thank Quote Answer

7/12/2006 11:15 AM	Rate (0)
balu Posts: 69 Rating: (9)	Hi, look at this FAQ http://support.automation.siemens.com/WW/view/en/22089969 Balu
balu Posts: 69 Rating: (9)
Suggestion To thank Quote Answer

4/6/2024 2:10 PM	Rate (0)
AutoGen_9026707 Posts: 16 Rating: (0)	can you tell me , how did you solve this issue ?
AutoGen_9026707 Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

4/9/2024 9:25 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/11/2024 Posts: 14378 Rating: (1798)	AutoGen_9026707 can you tell me , how did you solve this issue ? Hello muneeb Check out this FAQ: https://support.industry.siemens.com/cs/de/en/view/6836122 It it does not help then you shoudl open a Service Request at Siemens Support Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on