Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Flex: Acknowledge All Visible Alarms or Multiple Alarms

Created by: Waterboy at: 11/3/2007 2:43 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/3/2007 2:43 PM	Rate (0)
Waterboy Posts: 85 Rating: (6)	Hello there, Is it possible in WinCC Flex to acknowledge all visible alarms (without configuring an alarm acknowledge tag) ? I think it should be possible, as when I test WinCC flex runtime on PC, I can acknowledgemultiple alarms by selecting them allusing shift key and then pressing the acknowldege button. I just don't know how to achieve this functionality on actual touch panle, may be MP370. Cheers !
Waterboy Posts: 85 Rating: (6)	Last edited by: Waterboy at: 03.11.2007 14:44
Suggestion To thank Quote Answer

11/4/2007 2:28 PM	Rate (0)
Thijs Posts: 121 Rating: (16)	You can put them in the same acknowledge group. As soon as one off the alarms in the group is acknowledged, all others are to.
Thijs Posts: 121 Rating: (16)
Suggestion To thank Quote Answer

11/7/2007 12:08 AM	Rate (0)
Waterboy Posts: 85 Rating: (6)	Hi, Well, that's certainly one way of doing it.But I want to acknowledgevisible alarms only. The work around I found is, configure the key to enable the on screen key board in HMI runtime, go on the the alarm contol page, and select all the (Ctrl + A) alarms and acknowledge them. If someone knows better way, I am most interested. Cheers !
Waterboy Posts: 85 Rating: (6)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on