Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Wincc Flexible to Simatic WinCC

Created by: OmegaProjects at: 3/15/2015 1:57 PM (1 Replies)

Rating (1)

Thanks 1

2 Entries

3/15/2015 1:57 PM	Rate (0)
OmegaProjects Silver Member Joined: 11/14/2008 Last visit: 5/6/2024 Posts: 504 Rating: (22)	Hi , Do I have to upgrade Runtime on panel also when I change from WinCC Flexible 2008 SP3 RT to Simatic WinCC (of TIA) ?

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users MicroMan

3/15/2015 10:07 PM	Rate (1)
MicroMan Platinum Member Joined: 11/29/2011 Last visit: 12/16/2024 Posts: 1361 Rating: (232)	Hi, Have a look at this link for guidance: Migrating Production Plants with SIMATIC (TIA Portal) - Visualization Also usefull: HMI-Migration - Migration made easy
	Last edited by: MicroMan at: 3/15/2015 10:18:54 PM - What you read here, please check with manuals and your requirements. - Do not forget to Test, Test and Test... - If the post is helpful, please RATE it! MicroMan
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on