Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Flexible2008 -Error

Created by: Anand_KP at: 4/6/2013 2:59 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/6/2013 2:59 PM	Rate (0)
Anand_KP Posts: 3 Rating: (0)	Please anybody help me to indentify what is the Program no. for EPROM- 6ES5375-0LA41. I am using PG710 with Step5 version 7.17. No external prommer installed. I want to read/write the EPROM,with step 5 software. Thanks and regards Anand.
Anand_KP Posts: 3 Rating: (0)	Last edited by: Anand_KP at: 5/9/2013 5:37 PM
Suggestion To thank Quote Answer

4/6/2013 3:30 PM	Rate (0)
sps-concept Gold Member Joined: 4/5/2006 Last visit: 8/13/2023 Posts: 642 Rating: (131)	Hello, it's the 17. Regards André Räppel --------------------------------------------------------------------------------- www.raeppel.de work faster withinnovative PLC-Tools

Suggestion To thank Quote Answer

4/6/2013 4:51 PM	Rate (0)
Anand_KP Posts: 3 Rating: (0)	Hi Andre...Thanks a lot...am able to read the EPROM. Thank you, Regards
Anand_KP Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on