Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Message Box

Created by: tutku_dalmaz at: 8/21/2008 9:02 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/21/2008 9:02 PM	Rate (0)
tutku_dalmaz Posts: 16 Rating: (0)	Hi friends, I have one question, under WinCC via VB scripts i can create a message box with these codes: [code] dim a a = msgbox("hello world",65) [/code] Is there any way to do this with C-action? Thanks lot for your interests.
tutku_dalmaz Posts: 16 Rating: (0)	Last edited by: tutku_dalmaz at: 8/21/2008 9:03 PM
Suggestion To thank Quote Answer

8/22/2008 7:57 AM	Rate (0)
PETER17 Posts: 55 Rating: (7)	"How can you create a Windows MessageBox and have the button pressed by an operator evaluated?" http://support.automation.siemens.com/WW/view/en/268859 ... and use Service & Support - Technical Forum > Search > (keyword:) MessageBox to find more informations
PETER17 Posts: 55 Rating: (7)
Suggestion To thank Quote Answer

8/22/2008 9:12 AM	Rate (0)
Palmerita Posts: 102 Rating: (13)	Hello Tutku!! In this case it would be [code]MessageBox(NULL, "Hello Wolrd", "Message", MB_OKCANCEL);[/code] For other Messagebox types, as PETER said, you should check the MS Documentation http://msdn.microsoft.com/en-us/library/ms645505(VS.85).aspx
Palmerita Posts: 102 Rating: (13)
Suggestion To thank Quote Answer

8/22/2008 9:29 AM	Rate (0)
tutku_dalmaz Posts: 16 Rating: (0)	Thank you Palmerita, that works fine.
tutku_dalmaz Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

8/22/2008 8:15 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi messagebox have been discussed here very often, please don't use them - they can cause serious problems during runtime, e.g. if they are used in global scripts and are waiting for operator inputs. nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on