Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC OPC A&E Client

Created by: BURN at: 12/11/2007 12:09 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/11/2007 12:09 PM	Rate (0)
BURN Regular Member Joined: 2/13/2007 Last visit: 12/9/2024 Posts: 3 Rating: (0)	Iam trying to set up a WinCC application to include the Alarm & Event Client via OPC. The OPC connection is to a SIMOTION and as I understand it the OPC A&E Server is the SIMOTION D435 and the OPC A&E Client is the PC. I have configured the OPC DA so my tags in the WinCC project work okay but I do not know which way to turn now to configure the OPC A&E Client. Has anyone any experience of this? Especially to a SIMOTION.

Suggestion To thank

12/11/2007 12:32 PM	Rate (0)
April Posts: 1776 Rating: (95)	HI, see the FAQ http://support.automation.siemens.com/WW/view/en/22892718 for SIMOtion see http://support.automation.siemens.com/WW/view/en/27097938 but i am not fmiliar with SIMOTION Best regards April
April Posts: 1776 Rating: (95)
Suggestion To thank

12/11/2007 2:11 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 12/10/2024 Posts: 4114 Rating: (195)	closed cause question posted twice. The second thread with the subject SIMOTION - WinCC OPC A&Eis published within the conference Motion Control System SIMOTION. The answer writen by April is copied. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on