Hello to all,

Is the first time that i use Web Navigator on TIA Portal.

In the past i have used web navigator on wcc 7.3 version

I do not understand how to install web navigator server (and client) During my installation, i do not find the Web Navigator option 

I tryed to "modify" after the first installation but also in this mode the web navigator otino there is'nt.

Surfing in internet i do not find specific manual to tia portal web navigator or other info

Anyone may help me ?

Thank you in advance 

Fabio

Hello fabioga66,

maybe this forum discussion will help you further (if you didn't know it already):
https://support.industry.siemens.com/tf//ww/en/posts/configure-web-navigator/147334?page=0&pageSize=10

Greetings,

Nzett11

I read carefully, but failed to install Web Navigator.

I installed IIS and all the other features required but the "web navigator installation" option does not appear.

My system consists of windows 10 Pro and tia portal V15.1 but all the manual refear to Tia portal V13 and W7 or W2008 server

What can i do ?

Thank you

Hi

You do not mention which dvd you use, but you will only find the Web Navigator server on the WinCC Runtime Install dvd. Not on the engineering install dvd.

...sent from App

Thank you for you suggest Michael, I use the DVD 1 : Runtime installation.

I have also tryed DVD two ...  (no success)

I do not understand where is the problem . Today i tryed to instal into Windows server 2016 but the same result

No Web Navigator installation Option

I'm afraid, my customer ask answer...

Hi,

I do not have a V15.1 dvd to test with, only V15.0 so I have attached a printscreen of this setup selection.

The V15.1 should look the about same.

SOLVED:

Wrong DVD ! substitute by siemens