Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Pro Failure to setup

Created by: Tomy Master at: 8/27/2015 8:42 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

8/27/2015 8:42 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 7/29/2023 Posts: 914 Rating: (40)	Dear friends, Currently, I am trying to setup WinCC Professional V13, but it failed and it showed that it can not be installed in parallel with WinCC Professional or WinCC Runtime Professional. Although in my labtop there is no such installed software, please see attached. Please help. Tomy Attachment Failure V13.gif (95 Downloads)
	Aim Higher
Suggestion To thank Quote Answer

8/27/2015 9:05 PM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 12/6/2023 Posts: 6826 Rating: (1351)	Hello , Tomy Master Dear friends, Currently, I am trying to setup WinCC Professional V13, but it failed and it showed that it can not be installed in parallel with WinCC Professional or WinCC Runtime Professional. Although in my labtop there is no such installed software, please see attached. Please help. Tomy Have you checked the following topic: 9) Uninstallation of WinCC (TIA Portal) Professional FAQ If installation of STEP 7 (TIA Portal) V13 aborts and you receive the message that you must uninstall an earlier version of WinCC Professional beforehand even though you have already done the uninstallation, this might be due to a Registry code. I hope this helps, hdhosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

8/27/2015 9:13 PM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 7/29/2023 Posts: 914 Rating: (40)	Thank you my friend. The problem has been solved by uninstalling the TIA V12 . Regards Tomy
	Aim Higher
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Min_Moderator

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on