dear all,

am using wincc v13 professional. Whenever comes the alarm that time customer want to indicate the alarm via single beep sound, it is possible the wincc professional...

advance thanks to ur support.

Hello prabhakaran

the Option "Horn" which exists in WInCC Classic V7.X (Which does what you want) ist not jet implemented in TIA Portal.

I do not know any automatic setting to do so.

As an Workaround you can use the following Way to run a Sound over C Script:

http://support.automation.siemens.com/WW/view/en/26731762

Then you have to trigger the Script with a Bit or a Tag that indicates an Alarm.

Bye Murof

hello sir,

kindly troubleshoot the below code,

I have one script code for audio sound, this code working fine in wincc v11 professional, but the same code does not work the wincc v13...

here I attached the c code for audio alarm

#pragma code ("Winmm.dll ")
VOID WINAPI PlaySoundA ( char* pszSound, char* hmode, DWORD dwflag );
#pragma code()
PlaySoundA("C:\\tada.wav",NULL,1);

thanks for support....

hello sir,

whenever I go to the link, happening the below

Your search - http://support.automation.siemens.com/WW/view/en/26731762 - did not match any documents.

Suggestions:

• Make sure that all words are spelled correctly.
• Try different keywords.
• Try more general keywords.

Murof

Hello prabhakaran

the Option "Horn" which exists in WInCC Classic V7.X (Which does what you want) ist not jet implemented in TIA Portal.

I do not know any automatic setting to do so.

As an Workaround you can use the following Way to run a Sound over C Script:

http://support.automation.siemens.com/WW/view/en/26731762

Then you have to trigger the Script with a Bit or a Tag that indicates an Alarm.

Bye Murof

dear all,

kindly reply for this link, I can't diagnose the error to the above code...

thank you.

Regards,

PRABHAKARAN D

Hello prabhakaran

On My Computer the Link is working without any Problems.

Perhaps this one works better for you (There are more FAq numbers for the same FAQ ):
https://support.industry.siemens.com/cs/ww/en/view/748844

The FAQs Name is: How can I output a sound via C script in WinCC?

---------------

I have testet the Script in the FAQ in TIA Portal V13 Sp1 Upd5 (Win7 Sp1 64 Bit) (Update 6 is released yesterday)

-> It works without any Problems, i  started it on a Button click.

To look whats wrong in your Script you can use a PrintJob/ScriptDiagnostic Control and do Printf outputs on starting your Script and after every Line and in the End. then you can see where Your Script Fails.

Bye Murof

-----

If this Information helps you could use the Rate Function

Dear Mr. Murof,

Do you think I will have any problems if I use this code in a server client configuration?