Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Wincc report layout designer problem

Created by: manmeet at: 11/26/2007 8:48 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/26/2007 8:48 PM	Rate (0)
manmeet Gold Member Joined: 1/3/2006 Last visit: 2/19/2024 Posts: 726 Rating: (71)	Hi there I am using WinCC ver K6.0.3.0 File attached is the part of the report generated through WinCC 1)Under time column first date is coming and then day,i.e mm/dd/yyyy format.I want to switch to dd/mm/yyyy format.How this is possible in report layout designer?I tweaked the settings of the page layout but did not got success. 2)I want time only upto minutes, i.e want to switch to hh:mm format from hh:mm:ss format. Thanks for the time Manmeet Attachment report1.JPG (145 Downloads)

Suggestion To thank Quote Answer

11/27/2007 1:33 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi Time and Date display is taken from Windows Operating system. Change Date and time there and you get the desired display in WinCC report April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

11/27/2007 3:06 PM	Rate (0)
manmeet Gold Member Joined: 1/3/2006 Last visit: 2/19/2024 Posts: 726 Rating: (71)	Negative April Its not working the way you said I went to Control panel and there at Regional settings changed the date format. Then ran the WinCC but report is still coming up with same date format. Can you also please tell me whether in report layout design it is possible to generate report dated from certain date to certain date. I mean that I want to take report from say 11/11/2007 10AM to 15//11/2007 8PM Do I need any specail package for this requirement? Any input from you side will greatly help me Thanks Manmeet

Suggestion To thank Quote Answer

11/29/2007 1:59 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, do you use the system object date/time (SysTime) if yes see property miscelaneous format and press the help button
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

12/3/2007 9:57 PM	Rate (0)
manmeet Gold Member Joined: 1/3/2006 Last visit: 2/19/2024 Posts: 726 Rating: (71)	Hi there April Sorry for such a late reply. Actually my project is running on two systems. Your method of changing date worked on Windows NT 2000 butIts not respondingin system runningon XP

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on