WinCC RT Pro V13 configuration on IPC427D

I am attempting to install WinCC RT Pro V13 on a IPC427D and I cannot seem to get it right...

So, I have plugged the USB which is provided with WinCC RT Pro into the IPC and ran the installer. I am able to open my WinCC projects but there do not seem to be a communications link between the HMI and the PLC. All of my IO fields are grey with a yellow caution triangle in the middle. When I look in "Add and Remove" programs on the IPC I can see that WinCC RT Pro is installed but Simatic Net is not. There was a license for Simatic Net on the USB noted earlier, so I believe that the issue is I have not installed Simatic Net correctly.

Could anyone explain how I might properly install Simatic Net or is there another solution to my problem?

Also if there is any referance material that you think might help me a link would be greatly appreciated.

Thanks, 

Update:

Problem solved.

The issue was Simatic Net was not installed.

Solution: I aquired a .ISO of the installer and ran it on the IPC, set up PG/PC interface and that was it!

Thanks and sorry for double posting

Closed, cause question posted twice.

The second thread with the subject WinCC RT Pro V13 configuration issues on an IPC427D is published within the conference SIMATIC WinCC (TIA Portal).

Best regards
Blue Moderator