Hello every one

I have a problem with WinCC RT Pro V13SP1 and S7 1200 PLC connection. The following are the details.

- PLC - S7 1200 DC/DC/Rly, HMI- WinCC RT Professional, V13 Sp1

- ES computer is visible from OS computer on Simatic Shell and vice-versa

- Screen shot from OS computer is attached

- All tags are unread from PLC and displayed with yellow triangle

Kindly help me to solve this problem

hi 

What is connection between PLC And PC??

The MAC address should be check , that is match by CP(Ethernet) card 

aliaskari

hi 

What is connection between PLC And PC??

The MAC address should be check , that is match by CP(Ethernet) card 

 Dear Aliaskari  I am using TIA V13SP1.  I could not locate the window you inserted. In my configuration no CP card is used. Built in Ether card on the PLC CPU is connected to the Profinet 

ashwin pandey

Check your PG/PC Setting. in 'Setting the PG-PC interface' under control panel

 Hello Aswin  The PG/PC setting is S7 online->Realtek ----- TCP/IP on the OS PC

RajSHJ

  Dear Aliaskari  I am using TIA V13SP1.  I could not locate the window you inserted. In my configuration no CP card is used. Built in Ether card on the PLC CPU is connected to the Profinet 

You have to check the logical device name, that should be according your Ethernet connection

for MAC address you have to Right click on industrial Ethernet and select Properties ,

aliaskari

 

RajSHJ

  Dear Aliaskari  I am using TIA V13SP1.  I could not locate the window you inserted. In my configuration no CP card is used. Built in Ether card on the PLC CPU is connected to the Profinet 

You have to check the logical device name, that should be according your Ethernet connection

for MAC address you have to Right click on industrial Ethernet and select Properties ,

Good luck

 Thank you for your support. I am using TIAV13SP1 and the interface is different. Could you please show me the same for TIA?

RajSHJ

 

aliaskari

 

RajSHJ

  Dear Aliaskari  I am using TIA V13SP1.  I could not locate the window you inserted. In my configuration no CP card is used. Built in Ether card on the PLC CPU is connected to the Profinet 

You have to check the logical device name, that should be according your Ethernet connection

for MAC address you have to Right click on industrial Ethernet and select Properties ,

Good luck

 Thank you for your support. I am using TIAV13SP1 and the interface is different. Could you please show me the same for TIA?

 ok, I will search about your problem in TIA , I will soon response