Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC Runtime Advanced Start Simulation Error

Created by: Obenam at: 7/26/2014 11:47 AM (21 Replies)

Rating (8)

Thanks 14

Result pages:: |; 1 | 2 | 3; |

22 Entries

Entries per page: 10 | 20 | all

7/26/2014 11:47 AM	Rate (0)
Obenam Posts: 49 Rating: (0)	Hello, I have a TP1200 HMI in my project. When I try to simulate the HMI project with Start Simulation button, an error occured. "The ...\IM\HMI\{11866113-23184}\Generates\pdata.fwc configuration file could not be loaded. The application will be terminated." I tried to simulate other project with TP1200 HMI on my PC and it works! But not for this project. I did "Saved as" for this project. But the new one does'nt simulate too. Please help me to solve this problem. Regards
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

7/30/2014 8:33 AM	Rate (2)
K!ke Posts: 1299 Rating: (136)	Hello, first of all save a copy of the project. then click on the hmi with right mouse button and choose Compile > Software (rebuild all) and try again to start the simulation... If this will solve the problem, send the previously saved version of the project to siemens support so they can analyze the reason of the error. K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users ksk007 Heavyman44 iHoot

8/2/2014 7:25 AM	Rate (0)
Obenam Posts: 49 Rating: (0)	Thanks K!ke for your reply I compiIed all the hardware and software of HMI. But it didn't simulate again. I solved my problem by insert a new HMI device into my project and copy & pasted all the tags and screens and etc. and delete the old HMI device. It works! Regards
Obenam Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

3/16/2016 11:16 AM	Rate (0)
dajiru2017 Regular Member Joined: 3/8/2013 Last visit: 11/11/2024 Posts: 1 Rating: (0)	Hi Obenam, I had the same problem like you. I solved it changing the WinCC RT module (I have a SIMATIC PC Station configured in my project) in hardware configuration, from the version 11 to v13, as i'm using TIA Portal v13.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users amcorgd GG_Engineering

9/23/2016 3:52 PM	Rate (0)
jakger93 Posts: 9 Rating: (0)	HI! I have the same problem. How can I fix it? I tried to insert new TP-1200 but it also doesn't work. I create new project but it also doesn't work. I use these versions. Attachment Capture.PNG (1393 Downloads)
jakger93 Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

9/23/2016 3:58 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/11/2024 Posts: 22474 Rating: (3037)	jakger93 HI! I have the same problem. How can I fix it? I tried to insert new TP-1200 but it also doesn't work. I create new project but it also doesn't work. I use these versions. Hi, Which error messages do you get? Are the WinCC Simulators installed on the system? (look under detail informationn of installed Software). Have you try the steps/tricks from the posts above? Which system do you use ?(Operatng system ....) Regards Christoph
	Last edited by: ChristophD at: 9/23/2016 3:58:28 PM
Suggestion To thank Quote Answer

9/26/2016 9:32 AM	Rate (0)
jakger93 Posts: 9 Rating: (0)	HI! I get this error message "The ......... .fwc configuration file could not be loaded. The application will be terminated." I use windows 8 pro. I tried to compile the software and the hardware. Also tried to change version. I reinstalled the wincc, unfortunately it also didn't work. I have no idea. The runtime works well with basic panels, the only problem with the comfort panels. Attachment Capture.PNG (1218 Downloads)
jakger93 Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

9/26/2016 9:50 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/11/2024 Posts: 22474 Rating: (3037)	Hello, ok and exist the fwc file in the directory of the project? Regards Christoph

Suggestion To thank Quote Answer

9/26/2016 11:51 AM	Rate (0)
jakger93 Posts: 9 Rating: (0)	This is the folder. Attachment Capture.PNG (1647 Downloads)
jakger93 Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

9/26/2016 11:56 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/11/2024 Posts: 22474 Rating: (3037)	which operation syste do you use? If you doubleclick in the pdata file in windows explorer what happens? can you try another path without special characters from you language? Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on